Hytrol TA Slider Bed Horizontal 10" Belt
very versatile conveyor, this 6'
Hytrol TA Slider Bed Conveyor can
be used in many types of material handling situations
as assembly line operations, sorting, packing, inspection
and practically anywhere that product needs to be moved
quickly and easily between two or more
points.. The Model
TA belt conveyor, or slider belt conveyor, is one of
the most common belt conveyors in use. Conveyor sets
up quickly and easily to save on installation time.
conveyor has been tested and is in good working condition.
Conveyor Company, Inc.
3PH 7A 50/60Hz.
WIDTH–is measured in two
ways; overall width (or bed width) and
belt width. Overall width includes the
width of the frame, which is 2" on
either side of the belt. The belt is 10" wide,
the frame is 14" wide.
HEIGHT–26" up to 40"
in. deep x 12 ga. formed steel slider bed
- powder painted.
DRIVE–Located on discharge
end of conveyor, chain guard on left hand
PULLEY–4 in. dia. with 1
in. dia. shaft at bearings, machine crowned
and fully lagged.
in. dia. with 1 in. dia. shaft at bearings,
2 1/8 in. dia. for 4 in. pulley. Pre-lubricated
1.9 in. dia. pre-lubricated ball bearings.
at tail pulley. Provides 4 in. of belt take-up.
pre-lubricated, self-aligning, ball bearings
on drive and tail pulleys.
worm gear C-Face speed reducer. No. 50 roller
chain to drive pulley.
- MOTOR–½ HP–230/460V –3
Ph.–60 Hz. Totally Enclosed C-Face.
SPEED–Variable with included
Reliance SP500 Inverter option.