Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit our online store!

 






 

6' Hytrol TA Horizontal Fixed Speed Slider 14" Belt Conveyor
 

 

 

 


6' Hytrol TA Slider Bed Horizontal 14" Belt Conveyor

A very versatile conveyor, this 6' Hytrol TA Slider Bed Conveyor can be used in many types of material handling situations such as assembly line operations, sorting, packing, inspection and practically anywhere that product needs to be moved quickly and easily between two or more points.. The Model TA belt conveyor, or slider belt conveyor, is one of the most common belt conveyors in use. Conveyor sets up quickly and easily to save on installation time. This conveyor has been tested and is in good working condition.

Specifications:

  • MANUFACTURER: Hytrol Conveyor Company, Inc.
  • MODEL: TA
  • SERIAL NUMBER: 131688
  • POWER REQUIREMENTS230VAC 3PH 1.7A 60Hz.
  • BELT–Ultimate 140 BBS–Nitrile.
  • BELT WIDTH–is measured in two ways; overall width (or bed width) and belt width. Overall width includes the width of the frame, which is 2" on either side of the belt. The belt is approx. 14" wide, the frame is 18" wide.
  • ADJUSTABLE HEIGHT–28" up to 40"
  • MANUAL MOTOR STARTER–Includes Cuttler Hammer motor starter with ON/OFF switch as shown in the photos.
  • BED–4 in. deep x 12 ga. formed steel slider bed - powder painted.
  • END DRIVE–Located on discharge end of conveyor, chain guard on left hand side.
  • DRIVE PULLEY–4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged.
  • TAIL PULLEY–4 in. dia. with 1 in. dia. shaft at bearings, machine crowned.
  • SNUB IDLER–Adjustable 2 1/8 in. dia. for 4 in. pulley. Pre-lubricated ball bearings.
  • RETURN IDLER–Adjustable 1.9 in. dia. pre-lubricated ball bearings.
  • TAKE-UP–Take-ups at tail pulley. Provides 4 in. of belt take-up.
  • BEARINGS–Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.
  • SPEED REDUCTION–Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.
  • MOTOR–1/3 HP–230/460V –3 Ph.–60 Hz.C-Face.
  • BELT SPEED–Fixed at approx 73 fpm (feet per minute).

Request more information on this item

 

 
 
1-800-990-2440 or (785) 256-4114