Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit our online store!

 






 

Coda 26" CMP26-MS Motorized Table Top Cold Mount Press Laminator
 

 

 

 


Coda 26" CMP26-MS Motorized Table Top Cold Mount Press Laminator

This Coda CMP 26-MS is an economical Cold Mount table top press laminator. This model is motorized and designed for pressure sensitive mounting and laminating products up to 26" wide The machine is also equipped with the optional "Heavy Duty" roll feed attachment. This attachment provides an unwind bar to facilitate coating substrates with Single Release adhesive materials. The attachment consists of two heavy brackets that attach to the base of the laminator and the "Auto Lock" Feed Bar. The Auto Lock Feed Bar is made from a custom aluminum extrusion with a special rubber cord threaded through it that automatically locks the roll on the bar in place. This makes for a simple chuck free, tool free method of mounting the adhesive roll. This machine has seen very little use and is in like-new condition.

Control Features:

  • Power ON-OFF Switch
  • Manual Mode – When power is applied and Reset has been pressed the machine will run at the speed set by the Speed Dial.
  • Foot Mode - When power is applied and Reset has been pressed the machine will run at the speed set by the Speed Dial whenever the footswitch is depressed.
  • Reset – Machine will stop when the electric eye is interrupted. The Reset must be pressed to re-activate the machine.
  • Emergency Stop – This button is located on top of the control box. Rotate and pull up to allow the machine to run. Push down for emergency STOP.
  • SPEED – Controls the speed of the machine and has an integrated ON-OFF position. Note: The motor starts running when the speed is at about 2 on the Speed Dial.

Specifications:

Manufacturer: Coda, Inc
Model: CMP 26-MS
Serial Number: 06-26-2292
Electrical: 115VAC / 3A
NIP Roller Specification
Width: 26" (66cm)
Type: Silicone
Diameter: 3.25" (8.25cm)
Maximum Roller Gap: 2" (5.08cm)

Request more information on this item

 

 
 
1-800-990-2440 or (785) 256-4114