Specifications:
GLUE
APPLICATION SYSTEM
Digital
Temperature Display with controller and 7 day timer. Variable
temperature setting: 250°-400°F
(120°-205°C). Capacity: 8 lbs. (3.63kg).
SPEEDS
Machine speeds variable to 3400 units per hour.
PRODUCTION
Average production is 1800 units (pads or multiple pad
strips) per hour. Actual output is determined by pad
thickness and operator feeding dexterity.
MAIN
DRIVE
1/2 HP permanent magnet DC drive motor with solid state
SCR controls for variable speed adjustment.
STANDARD
POWER REQUIREMENTS
1 Phase, 20 amps at 220/240V, 50/60Hz.
Options:
ROUGHING ASSEMBLY
Motor driven edge rougher. Aids preparation of difficult-to-bind
materials, such as coated stock. For any product benefiting
from greater glue application and penetration. 220/240V
only
PAD
COOLER
Permits faster cooling (and set-up) of padded surfaces
when high production is required or for pads thicker than
one-inch.
OPTIONAL CHILLER: for unusually thick pads.
NIP
JAWS
Allows for variation in pad thickness when drop leaf carbon
sets are being padded.
CUT
DOWN JAWS
Pocket height is reduced to assist in feeding short materials
- minimum height of three-inches (76.2mm).
THICK
WORK CLAMP JAWS
Allows padding of materials up to 3-inches thick (76.2.mm).
GREATER
MAXIMUM LENGTH
The basic 19-inch model will pad materials up to 19-inches
in length. For padding materials up to 24-inches (609mm)
in length, an alternate Model CP-24" is available.
CONVEYORS
TO FIT YOUR NEEDS
Optional 8 foot (2.44 meters) belted conveyor available
with separate speed control or other specially designed
conveyors
to
interface and transport pads to next operation.
Contact
us for more information.
SPACE
SAVING
The Circular Padder arrives fully assembled,
ready to start producing pads. No installation cost. It moves
around easily on heavy duty lockdown castors - for location
flexibility. Requires just a 6' x 8' space (1.83 X 2.44 meters)
not including space required for conveyor(s).
