Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit our online store!

 






 

1972 Challenge Century Single-Head Paper Drill
 
 


1972 Challenge Century Single-Head Paper Drill

This Challenge Century Single-Head Paper Drill is equipped with a 1/4 H.P. motor on the spindle and a 1/2 H.P. motor on the hydraulic unit. Individual motor controls are provided. To operate, simply raise the spindle to its highest point and insert a hollow drill (not included) into the spindle. Depressing the foot treadle brings the drill down through the lift of stock. After the drill reaches the bottom of its stroke, release the treadle and the drill will return to its top position. After each hole is drilled, the side guide is tripped automatically and the stock is then moved into position for the next hole to be drilled.

Specifications:

General Specifications  
Manufacturer Challenge Machinery
Model Century
Year of Manufacture 1972
Machine Type Single Head Paper Drill
Drilling Specifications  
Drill Head Operation Hydraulic
Maximum Drill Capacity* 2" (51 mm)
Drill Sizes Available 13 Sizes: 1/8"- 1/2" (3-13 mm)
Minimum Distance Between Holes
                             - With Adjustable Stops

3/8" (9.5 mm)
                             - With Fixed Gages 1/4" (6.3 mm)
Adjustable Range - Drill to Side Guide 1 to 18-1/2" (0 to 47 cm)
                             - Drill to Backgage 0 to 4" (0 to 10 cm)
Physical Specifications  
Table Height 38" (96.5 cm)
Overall Machine Height 59-1/2" (151 cm)
Floor Space Needed 33-1/2" x 41-1/2" (85 x 105 cm)
Electrical Specifications  
Standard 115 Volt Motor: 1/4 H.P., Spindle Motor - 14.7 Amps.
  1/2 H.P. Pump Motor
*   Smaller diameter drill bits will do lifts from 5/8" to 1-5/8" depending on the bit size.

 

 
 
1-800-990-2440 or (785) 256-4114