Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit Our eBay Store!


 



 
 
FEATURING . . .
Accurately applies Tape around the spine of
your product! Click HERE for more info.
Inventory > New Arrivals!
 
 

 

Listed below are the newest additions to our full online inventory

This page was last updated on: 9/9/2021

Click thumbnail for full-size photo if available


Click to View Video
Click for larger image

Inventory Number: 3611-3612
Machine Type: Shrink Wrap System
Manufacturer: Beseler
Model: 2420-MTB-II / TD-18-8
Serial:
Sealer: 08031158
Tunnel: 08031151
Electrical: Sealer: 220V/1PH/60Hz/15A
Tunnel: 220V/1PH/60Hz/40A
Location: N/A
Description: This Beseler Shrink Wrap System includes a Beseler 2420-MTB-II L-Bar Sealer & Beseler TD-18-8 Heat Tunnel. Both machines are used but in good working condition. System is sold as shown in the pictures and video. Included is a partial roll of 20" folded PVC film and a film micro perforator device. Power cords are not provided. These two machines will ship wrapped & secured on separate pallets. Shipping weight & dimensions for each are shown in the specifications. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3578
Machine Type: Multi Head Stitcher
Manufacturer: Bostitch
Model: 18
Serial:
N 189 8
Electrical: 208-230V / 3PH / 15A
Location: Topeka, KS
Description: This Bostitch 18 Multi-Head Stitcher is used but in good working condition. This stitcher features an updated non-standard drive system consisting of an electromagnetic clutch brake with custom electrical controls. Stitcher is activated by a movable foot switch. This machine does not have a thickness gauge installed. Thickness is easily adjusted for all stitcher heads at the same time by using the hand crank. An operator manual and wiring diagram are included. Stitcher wire is not included. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3046
Machine Type: Circular Padder
Manufacturer: Brackett
Model: CPM REB
Serial:
5190781
Electrical: 120V/20A/50-60Hz 
Location: Topeka, KS
Description: 19" CP; Fully Rebuilt, comes with New Machine Warranty. Conveyor is optional.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co050
Machine Type: Foil Stamping Press
Manufacturer: Gietz
Model: FSA 790 MFF
Serial:
11934
Electrical: 240VAC / 60A
Location: Illinois
Description: This 1992 Gietz FSA 790 MFF Foil Press is a production machine in good working condition and is located in Illinois close to the Chicago O'Hare airport. Includes RP 240 Foil Advance & PIAB Vacuum. 38594.49 hours. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: co049
Machine Type: Foil Stamping Press
Manufacturer: Gietz
Model: FSA 790 MFF
Serial:
11873
Electrical: 240VAC / 60A
Location: Illinois
Description: This 1990 Gietz FSA 790 MFF Foil Press is a production machine in good working condition and is located in Illinois close to the Chicago O'Hare airport. Includes RP 240 Foil Advance & PIAB Vacuum. 82212.75 hours. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co046
Machine Type: Automatic Tie Baler
Manufacturer: Maren
Model: 72-OE-C25R
Serial:
01652
Electrical: 460V / 3PH / 60Hz / 60A
Location: Texas
Description: This Maren 72OE Series Baler is a top feed baler with a 10' bale slide and advanced automatic tying. This baler was used as part of a trim removal system which consists of additional available units including a BloApCo 5TOB Trim Cutter along with a model 25-4 Material Handling Fan. The fan is used to send the cut trim to a Kernic K800 Trim Removal System which is available. There is also a 15 HP Daltec Return Air Blower available along with other tubing & parts. Please contact us for more details.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co045
Machine Type: Load Turner
Manufacturer: Automatan
Model: 7300
Serial:
LH321
Electrical: 460V / 3PH / 30A
Location: Pennsylvania
Description: This Automatan 7300 Load Turner is used but in good working condition. This is a load turner and jogger/aerator for pallet loads of paper products. This machine features a maximum format of 43" x 65" with a max pile height of 67" (including pallet). Designed to be installed in a pit to allow for easy pallet loading. This system is currently located in Pennsylvania and will ship via freight truck from that location. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co044
Machine Type: Pallet Shrink Wrap Oven
Manufacturer: BBC Industries
Model: S7455-4
Serial:
9268
Electrical: 480V / 3PH / 60Hz / 45A
Location: Pennsylvania
Description: This BBC S7455-4 Dual Force Pallet Shrink Wrap Oven is used but in good working condtion. Manufactured in 2008, it is designed to be mounted in a floor pit, allowing for pallet jack entry. This system includes the Autoquip Series 35 4,000 lb. capacity scissor lift which sits in the pit (78 x 61" x 29" deep) and elevates the load during the shrink cycle. Also includes the under-shrink blower option. This system is currently located in Pennsylvania and will ship via freight truck from that location. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co043
Machine Type: Press
Manufacturer: Magnum
Model: Genstar 3-Color
Serial:
N/A
Electrical: N/A
Location: Illinois
Description: This 1997 Magnum Genstar 3-Color Web Press is in good working condition and is located in Illinois close to the Chicago O'Hare airport. It is currently under power. Please contact us if you have any questions or to arrange a demo. Video available.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co042
Machine Type: Zero Speed Splicer
Manufacturer: KTI
Model: RH
Serial:
219
Electrical: 440/460/480 Volts 3 Phase 20 Amps
Location: Ohio
Description: This KTI Zero Speed Web Tail Splicer is used but was in good working condition when it was taken out of production. This is a Right Hand configured unit. Includes 1400 lb. Hoist. This item will ship by Freight from Ohio. Local pickup is also available. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co041
Machine Type: Zero Speed Splicer
Manufacturer: KTI
Model: LH
Serial:
221
Electrical: 440/460/480 Volts 3 Phase 20 Amps
Location: Ohio
Description: This KTI Zero Speed Web Tail Splicer is used but was in good working condition when it was taken out of production. This is a Left Hand configured unit. Includes 1400 lb. Hoist. This item will ship by Freight from Ohio. Local pickup is also available. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: co040
Machine Type: Folder
Manufacturer: Stahl
Model: 1426A-C-3 [Series 1400]
Serial:
140KG0077
Electrical: 208-230V / 60Hz / 29A
Location: Illinois
Description: This Stahl Folder Series 1400 is a 4/4/4 configuration system and is in good operational condition. This machine features a 24" x 40" maximum sheet size. A Robatech Holt Melt Applicator with 3 hoses and 3 nozzles is included. The right angles and delivery table shown in the video and pictures are also included. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co036
Machine Type: Press Heidelberg
Manufacturer: Heidelberg
Model: GTOZP 52+
Serial:
679164
Electrical: N/A
Location: Ohio
Description: This Heidelberg GTOZP 52+ is used but in good operating condition. This press was in production until recently when the owner upgraded to a larger press. This press is geared for numbering and includes 1 numbering shaft and 2 rings. Inking units for numbering are NOT included. It is located in Sidney, OH and will ship via freight truck from that location. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: 3670
Machine Type: Refrigeration Dryer
Manufacturer: Kaeser
Model: TD76
Serial:
1866
Electrical: 440-460V / 3PH / 60Hz / 6A
Location: Topeka, KS
Description: This Kaeser TD76 Refrigeration Compressed Air dryer is used but in good working condition. It was purchased by the previous owner brand new in 2018 and has been well maintained. This Air Dryer is skidded and wrapped and will ship by Freight Truck. Local pickup is also available (Topeka, KS). Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: 3669
Machine Type: Air Compressor
Manufacturer: Sullair
Model: 10-30 AC/AC
Serial:
003-89035
Electrical: 575V / 30HP / 3PH / 40A / 60Hz
Location: Topeka, KS
Description: This Sullair 10-30 AC/AC 30HP Rotary Screw Air Compressor is used but in good working condition. It was removed from service due to a plant closing. Compressor includes the optional Sound Attenuating Enclosure and is sold as shown in the photos. This machine is skidded and wrapped and will ship by Freight truck. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3656
Machine Type: Foil Stamping Press
Manufacturer: Thermotype
Model: NSF
Serial:
0301
Electrical: 220V / 1PH / 20A / 50-60Hz
Location: Topeka, KS
Description: This Therm-O-Type NSF Foil Stamping Press was running in production until recently as shown in the video and pictures. This machine was used for Foil Stamping only. Other capabilities (such as die cutting) will require additional parts or accessories that are not included. Machine includes Instruction & Parts Manuals, 3 extra Honeycomb Chases, 3 extra Makeready plates, 1 Letterpress chase and other miscellaneous tools & parts. Also includes a 17"x41" Drip Pan. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3642
Machine Type: Chipboard Inserter
Manufacturer: Brackett
Model: CO-35A / DX2100HD-A
Serial:
2100232 / 2100248
Electrical: 120V / 50-60 Hz / 15A
Location: Topeka, KS
Description: This Brackett Twinstream Webmaster is used but has been rebuilt and comes with a new machine warranty. Rebuild included the replacement of both drive motors, timing belts, all conveyor and inserter feed belts, bearings, idler roller assemblies, control panel switches and digital speed controls. This system includes a sheeter knife sensor (with 5 meter extension cable), reflective tape, power cord and operator manual. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: 3641
Machine Type: AutoTransformer
Manufacturer: Ward Transformer Co.
Model: SP-3-1558
Serial:
1252565-1
Electrical: 440/460/480V - 230V 3PH
Location: Topeka, KS
Description: This Ward AutoTransformer is used, has been tested and is in good working condition. It was originally part of a Muller Martini 1580 Perfect Binder system (Muller Martini PN:1050.4621). The transformer was removed when the binder was taken out of production and scrapped. Includes input and output power cords (approx 6' long each). This item is skidded and must be shipped by Freight Truck. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3637
Machine Type: Paper Cutter
Manufacturer: Polar
Model: 80 / Baumcut 31.5"
Serial:
73N1016
Electrical: 220V / 3PH / 60Hz / 20A
Location: N/A
Description: This 2003 Baumcut 31.5" Paper Cutter is a Polar model 80 manufactured by Polar for Baumfolder Corporation. Features an air table and 31.5" cutting width. This machine has been serviced which included changing the hydraulic fluid and replacement of the battery for the programming memory. A brand new knife has been installed and the original knife has been resharpened. The resharpened knife is included along with an operator manual, blade changing tools and cutting sticks. This machine has been tested and is in good working condition. Please view the video and photos and contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: 3632
Machine Type: Web Press Accessories
Manufacturer: Didde
Model: N/A
Serial:
N/A
Electrical: N/A
Location: Topeka, KS
Description: These Didde Glaser Web Press units & accessories include (1) 36" Spacer Cabinet, (3) Torque Tubes, (1) MVP 12" Print Insert, (1) 17.5"W x 17" Cross Perf Insert and (3) 22" Punch and Die Ring Assemblies. Please click on Spec Sheet link for more information on each item. These items are together in one crate and ready to be shipped or picked up. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3620
Machine Type: Perfect Binder
Manufacturer: Coverbind
Model: 301 DFS
Serial:
51202
Electrical: 115V / 60Hz / 10A
Location: Topeka, KS
Description: This Coverbind 301 DFS is a document finishing system designed to perfect bind covers to 8-1/2 x 11" sheets of paper in thicknesses ranging from 1/16" to 1/2". This machine was lightly used and is in good working condition. It has been tested by manual feed only and is sold as shown in the photos and video. System includes over 1,800 clear front report type covers (with strip of glue in the spine) which have a retail value of $2,504 (see list of covers in full description). Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3617
Machine Type: Laminator
Manufacturer: Ledco Inc.
Model: The Premier 4
Serial:
MA4-25-2665
Electrical: 120VAC / 50-60Hz / 12 A / 1440 Watts
Location: Topeka, KS
Description: This Ledco 25 Premier 4 Laminator has been refurbished and is in good working condition. New parts installed include the four 25" black rubber rollers. The 2 boxes of new surplus 1.5 mill 25" x 500' film (4 rolls total) shown in the pictures are included. The laminator table, operator manual, power cord and extra slitter blades are also included. Click on the Spec Sheet Link for more details. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3599
Machine Type: Air Suction Paper Folder
Manufacturer: Duplo
Model: DF-1000
Serial:
060200975
Electrical: 120V / 2A / 60Hz
Location: Topeka, KS
Description: This Duplo DF-1000 11x17" Air Suction Paper Folder is a fully automatic paper folding machine. It is in great condtion with a total count of 379,000 folded sheets. With a duty cycle of up to 80,000 per month, this machine still has a lot of life left in it. The folder is sold as shown in the pictures and video. Instruction manual is included. Stand/Table is not included. Please note that there is a small indentation in the mylar cover of the display (see pictures). The indent is not noticeable during normal use. Click on Spec Sheet link for more details and specifications. This item has been tested and is in good working condition. Folder has been crated at no extra charge for safe transport. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

 

We strive to ensure that this inventory list is as accurate and up-to-date as humanly possible.
Occasionally, there may be a typographical error. PFE reserves the right to correct any errors
when brought to our attention. All items listed are subject to prior sale. We receive new
shipments on a regular basis so please contact us if you do not find what you are looking for
on our website. All prices are subject to change.

 

 
 
1-800-990-2440 or (785) 256-4114