Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit Our eBay Store!


 



 
 
FEATURING . . .
Accurately applies Tape around the spine of
your product! Click HERE for more info.
Inventory > Press
 
 

 

Click thumbnail for full-size photo if available


Click for larger image

Inventory Number: co057
Machine Type: Web Press
Manufacturer: Didde
Model: ML 4-Color
Serial:
N/A
Electrical: 230V / 60Hz /3PH
Location: Near Topeka, KS
Description: This Didde ML Web Press is used and in good working condition. This is a 4-color press with a 17.5" width with a 22" sheeter repeat. The maximum web roll diameter is 40 inches. Other features include in-line perf, a Brackett jogger, dampener recirculating pumps and more. This web press is located near Topeka, KS and is currently under power. Please contact us if you would like to arrange a demo or if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co056
Machine Type: Web Press
Manufacturer: Didde
Model: MVPXF4 2-Color
Serial:
505-0038
Electrical: 230VAC / 50A / 60Hz / 3PH
Location: Near Topeka, KS
Description: This Didde MVPXF4 2-Color Press is used and in good working condition. Includes the variable size inserts shown in the specifications. Also included is a hydraulic lift for moving the cylinders and a Royce Circulation System. This press is located near Topeka, KS and is currently under power. Please contact us if you would like to arrange a demo. Click on the Spec Sheet link for more details and contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3664
Machine Type: Foil Stamping Press
Manufacturer: Thermotype
Model: SFM
Serial:
0602
Electrical: 220V / 20A / 1PH / 50-60Hz
Location: Topeka, KS
Description: This Therm-O-Type SFM Sheet Fed Foil Stamping Press has been tested and is in good working condition. A chase for 1/4" dies is included, along with 2" and 4" Better Posts and tools (for die mounting). Operation and Parts manuals are also included. This machine is setup for Flat Hot Foil Stamping with standard non-holographic film. Other machine capabilities (die cutting, numbering, embossing, holographic film) require additional parts which are not included. Die, foil, makeready phenolic board, heat tape and any other consumables are not included. Please watch the demo video, review the specifications and contact us if you have any questions.
Upgrade modifications made by the previous owner of this machine include the ability to regulate foil tension pneumatically rather than mechanically as in a standard SFM. This results in improved foil tension control. The die chase locking mechanism has also been upgraded from mechanical to pneumatic control. A slider rail attached to the chase has been installed for easier removal and installation of the chase. The operator can unlock the chase by using the pneumatic locking switch and then pulling the chase out. This makes it simple to temporarily remove the chase to prevent foil stamping onto the makeready plate when no paper is present. For example, during setup or when when an interrupt stop occurs like a misfeed or double-feed. The slider rail assembly can also be rotated 180 degrees and pushed inward so that it rests on the chase support during setup and when replacing or adjusting dies. Another non-standard feature is the makeready plate 'platen detection' which will prevent the machine from running if a makeready plate is installed incorrectly, preventing damage. A service bypass key is provided to disable platen detection when performing maintenance that requires running the machine without a makeready plate.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click to View Video
Click for larger image

Inventory Number: 3642
Machine Type: Chipboard Inserter
Manufacturer: Brackett
Model: CO-35A / DX2100HD-A
Serial:
2100232 / 2100248
Electrical: 120V / 50-60 Hz / 15A
Location: Topeka, KS
Description: This Brackett Twinstream Webmaster is used but has been rebuilt and comes with a new machine warranty. Rebuild included the replacement of both drive motors, timing belts, all conveyor and inserter feed belts, bearings, idler roller assemblies, control panel switches and digital speed controls. This system includes a sheeter knife sensor (with 5 meter extension cable), reflective tape, power cord and operator manual. Please contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

Click for larger image

Inventory Number: co053
Machine Type: Zero Speed Splicer
Manufacturer: Martin Automatic
Model: EC820 40"x20"
Serial:
EC820-2948
Electrical: N/A
Location: Toronto, Canada
Description: This Martin Automatic Model EC Splicer accommodates rolls up to 20" wide and 40" diameter. This splicer is used and in good working condition. It is located in Toronto, Canada and will ship via Freight Truck from that location. Please click on the spec sheet link for more details and contact us if you have any questions.
Spec Sheet available! CLICK HERE

Request more information on this item

 

 

We strive to ensure that this inventory list is as accurate and up-to-date as humanly possible.
Occasionally, there may be a typographical error. PFE reserves the right to correct any errors
when brought to our attention. All items listed are subject to prior sale. We receive new
shipments on a regular basis so please contact us if you do not find what you are looking for
on our website. All prices are subject to change.

 

 
 
1-800-990-2440 or (785) 256-4114