Our Company

Equipment Videos

Online Inventory

New Arrivals!

Visit BindingTape.com

Parts & Supplies

Contact us

Visit Our eBay Store!



Brackett Circular Padder Specifications



Basic Operation:
1. Work is placed in the clamps at the feed station. Each pad is automatically jogged and clamped firmly before it travels over the glue pot.
  2. Hot melt glue is applied by a roller as the table rotates and the clamps carry the pads around the machine and over the glue pot.   3. The glue has set and the pad is finished by the time it reaches the delivery chute and is dropped onto the accumulator conveyor.


Circular Padder With Accumulator Conveyor

For padding materials up to 19-inches (482mm) in length, please ask for information on the model CP-19. For materials up to 24-inches(609mm) in length, there is an alternate Model CP-24. (Note: Rebuilt & Refurbished machines are subject to availability. If you are looking for a brand new machine we can quote that for you also. Please contact us with your specific needs.

     Pad Thickness: Designed to handle any thickness from two sheets min. to 1" max. standard (2.54 cm), optional up to 3" (7.62 cm).
     Pad Length: Work length from 3" min. (7.62 cm) to 19" (48.26 cm) on the 19" model, and 24" (60.96 cm) on the 24" model.
     Pad Height: Work height from 3" (7.62 cm) min to 14" (35.56 cm) max.
     Glue Pot: Digital Temperature Display with controller and 7 day timer. Variable temperature setting: 250°-400°F (120°-205°C). Capacity: 8 lbs. (3.63kg).
     Speeds: Machine Speeds variable to 3,400 units per hour. Speed control is located on the control box.
     Production: Normal production is 1,800 padded strips per hour.
     Main Drive: 1/2 HP permanent magnet DC drive motor with solid state controls for speed adjustment.
     Power: 20 amps at 115v, 50/60 hz, 1 Phase. 15 amps at 220v 50/60 hz, 1 Phase
Optional Features
     Roughing Assembly: Optional Motor driven edge rougher. Aids preparation of difficult-to-bind materials, such as coated stock. For any product benefiting from greater glue applications and penetration. 220/240V only.
     Pad Cooler: The water pot option permits faster cooling (and set-up) of padded surfaces when high production is required or for pads thicker than one-inch. An OPTIONAL CHILLER is available for unusually thick pads.
     Nip Jaws: This optional jaw allows for variation in pad thickness when drop leaf carbon sets are being padded.
     Cut Down Jaws: The cut-down jaw option reduces pocket height to assist in feeding short materials - minimum height of three-inches (76.2mm).
     Thick Work Clamp Jaws: An option that allows padding of materials up to 3-inches thick (76.2mm).
     Conveyor: 8 foot long belted conveyor. (optional)

Request more information on this item

1-800-990-2440 or (785) 256-4114